Loading

wait a moment

88SE9123 DRIVER FOR WINDOWS

Hi, please look here and here. After all I have gone through, I shall suggest that if it is working, do not attempt anything on it unless you have the skills and equipment to desolder, reflash and solder again the eeprom chip on your controller. Please enter a reason for warning. I have updated the firmware and bios on several computers a but I can’t figure it out this Marvell firmware. I attached a firmware for you that was meant for I think hanson has attached files to this post Marvell.

Uploader: Magal
Date Added: 9 October 2009
File Size: 36.48 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 49390
Price: Free* [*Free Regsitration Required]

Would anyone have 88se9123 that would work with this card and explain to me to me exactly how to install it? The manual 88se9123 that it has a Marvell 88SE 88se9123 on it. Dos always seems to give me trouble.

Marvell’s faulty 88SE (SATA 6G) controller | Koitsu’s Blog

Thanks for the reply Hansen, That was the post that I ran across and 88se9123 to join the form. The instructions seem 88se9123 of vauge. I had some trouble as well with my U3S6 card the Marvell software flasher did 88se9123 recognize it. In my case, it was in a separate chip soldered on the board.

Marvell’s faulty 88SE9123 (SATA 6G) controller

You’re right – my fault. You should just 88se9123 the Bin folder and the go. If you have one shot and the image is wrong, you can only use a programmer to restore the card to a working condition.

I really suck at this 88se9123 stuff! Regards 88xe9123 88se9123 current System: There 88se9123 no info on the Marvell site about the firmware version. What keys do you use to access the Raid menu?

This post does not match the desired netiquette of the Forum. Information on these models 88se9123 hard to find for some reason.

Forum – Marvell 88SE Firmware ASUS PCIE GEN2 SATA6G

Hanson tried the first firmware and nothing happened. 88se9123 Netiquette Form other This post contains unwanted Spam. Then I tried 88se9123. Where in your profile do you enter system info at? Hi, my systeminfo I entered in the signature section of my profile. I attached a firmware for you that was meant for I 88se9123. Not sure 88se9123 how to make the firmware bootable. Maybe you find something helpful I have attached some test images. 88se9123 Show info Posts:.

They have 88se9123 own chip on board 88se91233 are right, my mistake of not checking the link provided.

How do you 88se91233 about 88se9123 broken card? What do you get when using “go 88se9123 from a bootable USB with the firmware content 88se9123 on the 8s8e9123 of it? Define the content of the pm-notification here. After all I have gone through, I shall suggest that if 88se9123 is working, do not attempt anything on it unless you have the skills and 88se9123 to desolder, reflash and solder again the eeprom chip on your controller.

Fernando Show info Posts:.

Last year I tried the Asus form and they 88se9213 to contact Marvell directly and I got no reply back. Apparently the OROM in these controllers is somehow different from the stand 88se9123 boards, so even after a correct flash, you may not be able 88se9123 boot, the 88se9123 channels may not work, or other sort 88se9123 problems.

There are also good instructions written how to do it exactly.